Alfatronix PowerVerter PVPm-S USB Charger (Bus Pole Mounted)

Further details of Alfatronix PowerVerter PVPm-S USB Charger (Bus Pole Mounted)

• USB is the preferred method for charging mobile devices on the move. The Alfatronix range of PVPro chargers can already be seen installed on vehicle walls, seat backs and table tops as well as under seats. The PVPm-S USB charger is designed for applications where journeys are relatively short and passengers are standing for some or all of their time on the vehicle. These units are designed for installation onto vertical poles and offer a robust solution for buses, trams, trains and metro carriages.

The units are designed to be fitted directly to 35mm diameter poles and provide an
easily accessible and strong charging solution. These chargers utilise the latest fast charge technology and will seek to communicate with the phone and where compatibility exists, will automatically increase the charge voltage. Using this system, it is possible to provide a useful charging boost even over relatively short time
periods.

• The PVPm range has been designed to meet the rigorous standards required for on
board commercial vehicle applications including EN50498 and ISO7637-2 and is both
CE and E marked (Reg10). The casings are made from V0-rated (self-extinguishing)
high impact polycarbonate and the PCB is populated by computer-controlled SMT
for maximum accuracy and durability.
• The range has been designed to meet the rigorous standards required for on board commercial vehicle applications including EN50498, ISO7637-2, and is both CE and E marked (Reg10). The casings are made from V0 rated (self-extinguishing) high impact polycarbonate and the electronic assembly is predominantly by computer controlled SMT for maximum durability.
• The PVPm Series of Pole mounted USB chargers are manufactured using rugged components to provide years of service in demanding commercial environments and are covered by a three year return to base warranty.

Technical Data:
• Input voltage range: 9-32Vdc
• Output voltage: 5Vdc +/- 0.2V for BC 1.2V and up to 9Vdc for Q.C 3.0
• Output power: 10W for BC 1.2 and 12W for Q.C 3.0
• Application: Charges all USB devices including Apple and Android
• Transient voltage protection: Meets ISO7637-2 International standard for 12/24Vdc vehicles and EN61000.4.4 and 4.5
• Output noise: <50mV pk-pk
• Off load current (quiescent current): <1,7mA
• Power Conversion Efficiency: 90%
• Operating temperature: -25ºC to +55ºC to meet this specification table
• Storage temperature: -25°C to +100°C
• Operating humidity: 95% max., non-condensing
• Casework: Dark grey polycarbonate body (R118 + EN45545 materials approved)
• Connections: 6.3mm push on flat blade connectors, output: USB type A single socket - tested to 10000 mating cycles
• Output indicator: LED indicates unit operational
• Mounting Method: Screw mounting to vertical pole (Ø35mm)

• Safe area protection:
- Over current: Limited by current sensing circuit
- Over heat: Limited by temperature sensing circuit
- Overvoltage and undervoltage: Limited by sensing circuit
- Reserve Polarity: Limited by sensing circuit
- Transients: Protected by filters and rugged component selection
- Catastrophic protection: Internal fuse
• Approvals: 2014/30/EC The general EMC directive, 93/68/EEC The CE marking directive, Regulation 10 The automotive directive
• Designed to: EN50498, EN55032, EN50155, EN50121-3-2 & ISO 7637-2
• Markings: CE and E marked
• IP Rating: IP53