Antenna Coax Connector
- further categories
An antenna coax connector that is fit for purpose and meets the technical requirements is essential to ensure a sufficiently fast, smooth and continuous transmission of information. Read more...
• Band: HF or VHF and UHF
• Max: 6GHz/1W
• Isulation: Teflon
• Branded quality product
• Especially for high frequency range usage
• J01026A0013
• Cable type: Ecoflex 10, H-1000
• Type of fixing: crimp
• Clamping torque: 4-6 Nm
• The picture shows the version with model number 7370, the price refers to this version
• Manufacturer's item number: 7370
Special gross price: 5.27€ (Net price: 4.15€)
• Wave impedance: 50Ω
• Spatial orientation: straight
• Cable type: B7805A, KX3, KX22, M17-113, M17-119, RG174, RG188(A), RG316
• Insulation material: teflon (PTFE)
• Contact coating: gold plated
• Frequency max: 12.4GHz
• Electrical installation: crimping
• Mechanical mounting: on wire
• Spatial orientation: 90 degrees
• Frequency range: DC-6 GHz
• Impedance: 50 Ohm
• Operating voltage: max. 250 V
• Type of cable: LMR100, RG174, RG316
• Electrical installation: crimping
• Mechanical mounting: on wire
• Insulation material: Teflon (PTFE)
• Contact coating: gold plated
• Cable type: Ecoflex 10/PLUSZ, H-1000
• Type of fixing: crimpable
• Coupling torque: 4-6 Nm
• IP 65 dust and water resistance
• Silicone gasket on the fitting side
• The picture shows the version with model number 7366, the price refers to this version
• Manufacturer's item number: 7366
• Frequency range up to: 11 GHz
• Impedance: 50Ω
• Mainly for high frequency use
• Cable group; cable: G21 (1/2"); 5128 1/2"-LD FlexLine; 1/2" R; HFC 12D; HPL 50-1/2; LCF 12-50 J; LDF4-50A; RFA 1/2"-50; RFX 1/2"-50; Sucofeed 1/2
• Gasket: silicone, NBR
• Sealing: PTFE
• IP68 protection
• IEC 61 169-16 standard
• For both flexible, semi-rigid and corrugated cable types
• Rotator/clamp; ferrule
• Operating voltage: ≤ 1 kVrms/50 Hz
• Frequency range: 11 GHz
• Impedance: 50 Ω
• Assembly: B01
• Recommended clutch torque: 4-6 Nm
• Durability (mating): ≥ 500
• Return loss: 1 GHz: -40 dB; 2 GHz: -35 dB; 4 GHz: -28 dB
• Insulation resistance: ≥ 5 GΩ
• Insulation: PTFE
• Gaskets: silicone, NBR
• IP67 dust and water resistance
• Band: HF or VHF and UHF
• Max: 4GHz/1W
• Isulation: Teflon
• Branded quality product
• Especially for high frequency range usage
• J01006A0020
• Connection type: socket N
• Impedance: 50Ω
• Cable type: H1000
• Electrical installation: crimping
• Mechanical mounting: on wire
• Insulation material: Teflon
• Contact coating: gold plated
• Recommended clutch torque: 4-6 Nm
• Impedance: 50 Ω
• Operating voltage: ≤ 1 kVrms/50 Hz
• Frequency range: 11 GHz
• Insulation: PTFE
• Gaskets: silicone, NBR
• Mounting: B90
• Return loss: straight style ≥ 30,5 dB/1 GHz; angle style ≥ 30,5 dB / 1 GHz
• Voltage proof: 2.5 kVrms/50 Hz
• Insulation resistance: ≥ 5 GΩ
• IP68 protection
• Recommended clutch torque: 4-6 Nm
• Durability (mating): ≥ 500
• Impedance: 50 Ω
• Operating voltage: ≤ 1 kVrms/50 Hz
• Frequency range: 11 GHz
• Insulation: PTFE
• Gaskets: silicone, NBR
• Mounting: B90
• Refund loss: straight style ≥ 30,5 dB/1 GHz; angle style ≥ 30,5 dB / 1 GHz
• Voltage proof: 2.5 kVrms/50 Hz
• Insulation resistance: ≥ 5 GΩ
• IP68 protection
• Band: HF or VHF and UHF
• 6GHz/25dB, 50Ohm/1W
• Isulation: Teflon
• Branded quality product
• Especially for high frequency range usage
• J01152R0011
• Band: HF, VHF or UHF
• Isulation: Teflon
• J01014R0000
• Band: HF, VHF or UHF
• Isulation: Teflon
• J01019A0032
• Recommended clutch torque: 4-6 Nm
• Impedance: 50 Ω
• Operating voltage: ≤ 1 kVrms/50 Hz
• Frequency range: 11 GHz
• Durability (mating): ≥ 500
• Voltage protected: 2.5 kVrms/50 Hz
• Insulation resistance: ≥ 5 GΩ
• Insulation: PTFE
• Gaskets: silicone, NBR
• Mounting: B92
• Return loss: straight style ≥ 30,5 dB/1 GHz, angle style ≥ 30,5 dB/1 GHz
• IP68 protection
• Recommended clutch torque: 4-6 Nm
• Durability (mating): ≥ 500
• Operating voltage: ≤ 1 kVrms/50 Hz
• Impedance: 50 Ω
• Frequency range: 11 GHz
• Insulation resistance: ≥ 5 GΩ
• Insulation: PTFE
• Gaskets: silicone, NBR
• Voltage protected: 2,5 kVeff/50 Hz
• Return loss: straight style≥ 30,5 dB/1 GHz; angle style≥ 30,5 dB/1 GHz
• Mounting: B92
• IP68 protection
• Connector type: coaxial 9.5mm (IEC 169-2) plug
• Connector type: male
• Cable type: RG6
• Connector Series: CX3
• Electrical Installation: compression
• Connector type: N female
• Cable type: RG 213
• Electrical installation: clamp, soldering
• Mechanical mounting: on wire
• Insulation material: teflon
• Band: HF, VHF or UHF
• Isulation: Teflon
• J01019A0034
• Band: HF, VHF or UHF
• Isulation: Teflon
• J01014A0001
• Impedance: 50 Ω
• Voltage protected: 1 kV/50 Hz
• Operating voltage: ≤ 335 V/50 Hz
• Recommended clutch torque: 79-113 Ncm
• Insulating material: PTFE
• Gasket material: MVQ
• Standards: IEC 60 169-15
• IEC plug F-socket adapter
• Impedance: 75 Ω
• Filter efficiency: EN50117 (class A+)
• Shielding 30-1000 MHz: >95 dB
• Shielding 1000-2000 MHz: >85 dB
• Shielding 2000-3000 MHz: >75 dB
Special gross price: 0.59€ (Net price: 0.46€)
• F female - IEC female Adapter
• Impedance: 75 Ω
• Filter efficiency: EN50117 (class A+)
• Shielding 30-1000 MHz: >95 dB
• Shielding 1000-2000 MHz: >85 dB
• Shielding 2000-3000 MHz: >75 dB
• IEC-male - F-female adaptor 90 degree angled Adapter
• Frequency range: 5-1000 MHz
• Filter efficiency: EN50117 (class A+)
• Impedance: 75 Ω
• Return loss: -17.5 (862MHz) dB
• Insertion loss (tip): < 0.38 (862MHz) dB
• Electroplating: nickel/gold inner pin
• Frequency range: 5-1000 MHz
• Impedance: 75 Ω
• Return loss:-18 (862MHz) dB
• Insertion loss (tip):< 0.36 (862MHz) dB
• Filter efficiency:EN50117 (class A+)
• Shielding: 30-1000 MHz >95 dB
• Shielding: 1000-2000 MHz >85 dB
• Shielding: 2000-3000 MHz >75 dB
• Electroplating: nickel/gold inner pin
Essential information for choosing the right antenna coax connector
It is easy to see how many different antenna coax connector versions are available within the site. To give you a few examples, we have UHF amphenol, N, BNC, SMA or TNC antenna coax connector types, among others.
For the search and selection it is important to distinguish between the specific parameters of each variant. As an example, antenna coax connectors with a 50 ohm coax connector to 75 ohm should be used with special attention to the availability of RF cables. Although 50 and 75 ohm coax connectors may be physically compatible, they should not be interchanged in the system.
We offer a wide range of 50 ohm RF coax connectors. BNC, UHF (amphenol), N, SMA, RPSMA, mini UHF, FME, TNC and RPTNC coax connectors, RF connector adapters and splicers. We also do custom cable manufacturing in small and large quantities.
75 ohm coax connectors for CCTV video systems, TV and TV antennas. Our range includes TV coax connectors, 75 ohm BNC connectors, F connectors and adapters and splicers. You will find our range of 75 ohm coax cables for coax connectors in our relevant category.
Applications of the antenna coax connectors available on this site
There are several industries where the selection, availability and use of the right connectors is a key consideration. Typical examples include aerospace, communications, and asset protection and security.
In other words, industries where data transmission needs to be reliable, fast and accurate. Where there is no margin for error, the use of the right antenna coax connector is key.
But similarly, the applications of the antenna coax connectors available on the site could be in the field of medicine, or in the engineering industry, for example. It can therefore be concluded that, although they are devices with specific parameters, their application in a relatively wide range of environments can be considered.
What you need to know about mounting antenna coax connectors
An important thing to know about the purchase of an antenna coax connector is that each type may have its own specific mounting method. When purchasing, you may therefore want to check which specific tools may be required for the installation.
Otherwise, it is easy to find the crimping pliers, blancher or any other work tool needed to mount an RF connector or other antenna coax connector here in the webshop. Simply click on the product category names available on the left-hand side of the page or use the search function at the top of the page.