Assembled 75 ohm TV Antenna Cable
The most common use of the 75 ohm TV aerial cables is to transmit signals from Yagi, satellite dishes or even cable TV to the TV set. For TV antennas, cable TV networks, video signal transmission, we mainly use 75 ohm impedance coaxial cables. Read more...
• Connectors: IEC male - IEC female 90°
• Cable length: 3,5 m
• Material: PVC
• Number of shades: 2
• Connectors: IEC male - IEC female
• Cable length: 1.25 m
• Material: PVC
• Number of shades: 2
• Connectors: IEC male - IEC female
• Cable length: 2.5 m
• Material: PVC
• Number of shades: 2
• Connectors: IEC male - IEC female
• Cable length: 3.5 m
• Material: PVC
• Number of shades: 2
• Suitable for outdoor use
• Impedance: 75 Ohm
• Coaxial cable type: 3C2V
• UV resistant
• Cable sheath diameter: 3 mm
• Cable sheath colour: white
• Cable sheath material: PVC
• Inner wire diameter: 0,5 mm
• Inner wire material: copper (Cu)
• Shielding material: copper clad aluminium (CCA)
• Number of shields: 1
• Connectors: IEC male - IEC female
• Cable length: 5 m
• Material: PVC
• Number of shields: 2
• Connectors: IEC plug - IEC socket 90°
• Cable length: 2,5 m
• Material: PVC
• Number of shields: 2
• Connectors: IEC male - IEC female
• Cable length: 10 m
• Material: PVC
• Number of shields: 2
• Connectors: IEC male - IEC female 90°
• Cable length: 5 m
• Material: PVC
• Number of shields: 2
• Connectors: IEC male - IEC female
• Cable length: 15 m
• Material: PVC
• Number of shields: 2
• Connectors: IEC male - IEC female 90°
• Cable length: 15 m
• Material: PVC
• Number of shields: 2
• Connectors: IEC male - IEC female 90°
• Cable length: 10 m
• Material: PVC
• Number of shields: 2
• Roll Length (Metric): 10 meter
• 2 with F connector (male)
• Used to connect the TV antenna unit to the indoor TV unit
• Conductors: 1.02 ± 0.02mm Copper Clad Steel (16%)
• Insulation: 4.80 ± 0.10mm, Gas Injected Foam, Polyethylene (White)
• Shielding: AL-Foil + 64 × 0.12mm AL-Braid wire
• Jacket: 6.8 ± 0.20mm PVC white - Meter marked
• Roll Length (Metric): 20 meter
• 2 with F connector (male)
• Used to connect the TV antenna unit to the indoor TV unit
• Conductors: 1.02 ± 0.02mm Copper Clad Steel (16%)
• Insulation: 4.80 ± 0.10mm, Gas Injected Foam, Polyethylene (White)
• Shielding: AL-Foil + 64 × 0.12mm AL-Braid wire
• Jacket: 6.8 ± 0.20mm PVC white - Meter marked
• Waterproof window pass-through cable
• F socket - F socket connectors
• Cable length: 0.2 m
• Extremely flat (0.3 mm)
• For easy routing of coaxial cables through window and door frames with small clearances without damaging the closing function
• Rubber grommet ensures waterproof F-connection
• Permanent fixing thanks to screw fixing option
• Impedance: 75 Ω
Special gross price: 6.01€ (Net price: 4.73€)
• Connectors: IEC male - IEC female
• Cable length: 1,5 m
• Material: PVC
• Number of shields: 2
• Connectors: IEC male - IEC female
• Cable length: 2.5m
• Material: PVC
• Number of shields: 2
Applications of 75 ohm antenna cables
The 75 ohm antenna cables are typically used for one-way communication, i.e. TV, DVB-T antenna, cable TV reception, SAT satellite reception. It also includes the transmission of analogue video signals. These mounted antenna cables allow signal transmission over a wide frequency range.
What length of 75 ohm TV antenna cable to choose?
Depending on where and how you want to use the antenna cable, you should choose its length in light of this. In the DND Telecom webshop you can choose from a wide range of options to find the right length of mounted antenna cable. You can choose from 1.25, 1.5, 2.5, 3.5, 5, 10, 15 and 20 meter long antenna cables. Make sure that the cable is the length you really need. After all, if you choose too short, you will have to extend it, which will lead to signal loss, and if you buy too long, you will also have the same problem.
What kind of connectors does the 75 ohm antenna cable have?
An antenna cable can have a number of connectors, depending on the purpose for which you want to use it. Basically, you can choose between N, BNC, SMA or TNC antenna connectors. But there are also RF connectors available. You can also buy SM, RPSMA, mini UHF, FME connectors. For mounted 75 ohm antenna cables, on the other hand, there are IEC and F connectors, which can be used by simply plugging one end into the TV and the other into the antenna socket on the wall.
Which brand of 75 ohm mounted antenna cable can you choose from the DND Telecom webshop?
In our shop you will find 75 ohm mounted antenna cables from Televes, Goobay, Amiko and Emos.