Assembled Coax Cable

The pre-mounted coax cables are a convenience, as you don't have to bother with choosing the right cable and the right connector for the units you want to connect. Many of us are not well versed in this world, and that's where pre-mounted coax cables are a huge help.

The best known use of aerial cables or also known as coax cables is to transmit signals from an aerial, satellite dish or even a cable TV or WiFi router. For television, antennas, cable TV networks, video transmission, we mainly use 75 ohm impedance cables, while for wireless data transmission, transceiver antennas, and other devices, 50 ohm cables are usually the most suitable.

Remember that factory-installed coax cables provide good quality reception. In their case, there is no chance that the connector will not be properly secured, which can lead to performance loss.

When to use pre-mounted 50 ohm RF coax cables?

Among 50 ohm antenna cables, RG-174, RG-58, H-155, H-500 or H-1000 are the most popular types. These type numbers are also in each case the designation of a manufacturer's product which has become so well established that other manufacturers have since used this type designation. For mounted 50 ohm RF coax cables, we use RG174 and RG-58 cables.

The cables have different outer diameters, bend radii and connectors. The cable length in this case is 5 meters, which is usually sufficient in almost all cases. For the mounted 50 ohm RF coax cables, there is an FME plug at one end of the cable and either an SMA or BNC connector at the other end.

Applications of pre-mounted 75 ohm TV antenna cables

The 75 ohm antenna cables are typically used for one-way communication, i.e. for TV, DVB-T antenna, cable TV, SAT satellite reception. But we cannot forget about the transmission of analogue video signals. Since these antenna cables ensure signal transmission over a wide frequency range, they guarantee top quality picture and sound every day.

Which is now almost a standard requirement, but for this you need a TV aerial cable of the right quality pre-mounted. One end of the cable is fitted with a perfectly fitting IEC plug and the other end is fitted with either a straight or 90 degree IEC socket. With the pre-mounted versions, you can always be sure that everything fits together perfectly. And there is a wide choice of cable lengths, from 1.25 metres to 10 metres.

Features of mounted WiFi antenna cables

Connecting different WiFi devices is different from connecting antennas. Perhaps the most striking difference is that there is no need for a metre-long cable. The WiFi antenna cable is 15-25 cm long. But also a number of plugs are used in the connectors. WiFi antenna cables have a number of connectors, depending on what you want to use it for.

In general, you can choose N, SMA, U.FL, MMCX, RPSMA connectors. They are very similar in form, which is why it is important to choose the right cable if you are not an expert in the subject. If you are not sure, the staff at DND Telecom webshop will be happy to help you choose the right pre-mounted WiFi antenna cable.