Icom IC-F3002 V08 VHF Two-Way Handheld Transceiver Radio (discontinued)

Further details of Icom IC-F3002 V08 VHF Two-Way Handheld Transceiver Radio

• A new high efficiency FET of the IC-F3002/IC-F4002 series reduces consumption current and provides 20 hours* of operating time with the BP-265, 2000mAh Li-ion battery pack. (Tx: 5%; Rx:5%; Stand by:90%)
• The IC-F3002/IC-F4002 radios are improved using the experience of the previous series. The battery connectors made with anti-corrosion metal surface which is surrounded with a rubberized layer.
• Easy to use due to the three main controls only. Transmit button, volume control and channel selector. This simple to use radio is ideal for high turnover environments and shift work where the radio is constantly passed from person to person. Additional 2 programmable function buttons are on the side of the radio. The LED lamp provides feedback for the user about the operation. (starting transmission, channel selection, etc.)
• The following features and settings are available with out any preprogramming: microphone gain, squelch level, output power.
• When the Lone Worker function is turned ON, and no operation is performed for the specified time period*, the transceiver enters the emergency mode, and then the countdown for the emergency call transmission starts. After the specified time period* has passed, an emergency call is automatically transmitted once, or repeatedly*. (*Depending on the presetting.)
• Limited MDC 1200 features and compatibility.
• Maximum 16 channels can be programmed into radio.
• The 5-Tone signalling (encoder/decoder) gives you selective calling, quiet stand-by and other convenient functions with programming. The radio “stun” function disables a radio over the air and the “revive” function restores the stunned radio.
• Built-in SEL 2/5, CTCSS, DTCS coder/encoder and DTMF autodial.
• Channel spacing: 12.5/20/25Khz; PLL channel step: 2.5, 3.125Khz (VHF); 5, 6.25Khz (UHF)
• 2-step power save
• Low battery alert
• Time-out-timer (TOT): The time-out timer limits continuous transmission time period to prevent accidental prolonged transmission.
• The priority scan allows you to monitor one or two priority channels while scanning other non-priority channels. The Tx channel and talk back functions allow you to make a quick response while scanning.
• The built-in bridge-tied load (BTL) amplifier offers powerful 800mW* audio output from the large 45mm speaker. The radio delivers loud and intelligible audio even in noisy environments.
• Internal VOX for hands-free operation (optional OPC-2004 audio cable and VOX compatible headset are needed)
• Confirms with IP54 standard (dust-protection and water resistant)
• Equivalent to MIL-STD 810 C, D, E, and F requirements
• Electronic serial number