Icom IC-M803 MF/HF Marine SSB Transceiver (discontinued)

Further details of Icom IC-M803 MF/HF Marine SSB Transceiver

*Please note that, this model does not comply with the latest EU type approval specifications.

• Standard 4 × 8 remote controller. The IC-M802 offers an industry-standard 4-inch tall (10.16 cm) remote controller. When set up with the Icom VHF radio, Icom offers you a complete communications station.
• ITU Class E DSC for non-solas vessels. When used with the optional antenna tuner, AT-141, and the OPC-1465 cable, the IC-M801E meets Class E DSC standards.
• Large LCD with dot matrix characters. You can easily read the alphanumeric name of any of the 1355 ITU channels at a glance with the large LCD display. Nighttime operation is no problem with 10 levels (plus OFF) adjustable backlit display and keypad.
• Easy to use in all conditions. The IC-M802 offers two large dials – bank and channel – for easy channel selection. Up to 16 banks of 20 (max.) each for user channels, and 17 banks for ITU channels are available.
• Built-in digital selective calling. For added safety at sea, the IC-M802 offers the latest in one-touch DSC emergency communications technology. (ITU Class E standard.) The emergency button is covered by a red, spring loaded hatch to avoid accidental DSC activation.
• Digital signal processor advantage. The speech compressor, utilizing DSP, increases average talk power. Flexible fi lter settings provide for narrow band signals like e-mail, SITOR, FSK and other operation without an optional fi lter.
• 150W (PEP) of powerful output. 150 Watts of power offers superior worldwide communications. A one piece, die cast aluminum chassis and a large cooling fan allow continuous transmission at full output power – very important for data communications, like e-mail.
• One-touch e-mail access. An SSB fi rst! The IC-M802 can be set to memorize your HF e-mail access frequency, mode and bandwidth settings. At sea e-mail has never been easier. * Please consult with an HF e-mail provider for details.
• Automatic antenna tuner, AT-140. An optional automatic antenna tuner, AT-140, easily connects to the IC-M802. When the tuner cannot tune the antenna, the IC-M802 bypasses the tuner and displays a warning indicator on the LCD.
• Wide band receive coverage (0.5 – 29.9999MHz)
• Remote control mic allows you to select channels directly
• Accessory RS-232C port allows connection of modem, etc.
• GPS input, NMEA 0183 version 3.01
• A headphone jack in front of the controller