Icom ID-51E PLUS2 Handheld Amateur Transceiver Radio (discontinued)

Further details of Icom ID-51E PLUS2 Handheld Amateur Transceiver Radio

• Download the instruction manual for advanced instructions at the following link (78,5MB): https://www.icomjapan.com/
• Download the free of charge programming software for ID-51E at the following link: https://www.icomjapan.com/
• The 26.4mm slim body contains 5W output, VHF/UHF dual bands, a rich D-STAR and integrated GPS receiver feature set.
• The ID-51E has a compact 58×105.4×26.4 mm body, and weighs only 255g (approx.) with battery pack and antenna. In this slim body, the ID-51E contains 5W output power, VHF/UHF dual band, D-STAR and integrated GPS receiver feature set.
• The ID-51E receives two bands simultaneously including two frequencies in the same band. *The ID-51E cannot receive two bands simultaneously in the following combinations: DV/DV, AM/AM, FM-N/FM-N and DV/FM-N modes
• The ID-51E is compatible with the JARL D-STAR format. The D-STAR DV mode has lots of advantages over analogue FM mode: digitally modulated clear voice, quiet stand-by, individual calling using a call sign and access to the world wide repeater network linked with the Internet.
• The DR (D-STAR repeater) mode operation connects D-STAR users more effortlessly. In this mode, you can select the pre-programmed repeater in FROM item and desired call sign in TO item. Just two simple steps needed.
• Using the GPS position information, the automatic repeater list-up function shows the list of nearby D-STAR repeaters from the memory* and helps you to access the nearby D-STAR repeater. * To use the automatic repeater list-up function, the position data of the repeater is required. The ID-51E will be shipped with D-STAR repeater memories pre-programmed, but the position data of some D-STAR repeaters may not be available.
• The integrated GPS receiver provides fast start-up time and accurate position. Your current position and altitude are shown on the display and offers a position reporting function in DV mode. The GPS-A mode assists in easy D-PRS mode operation.
• When receiving a call addressed to your call sign, the ID-51E can automatically reply your current position information. Between ID-51E's communications, replied position information can pop up on the callers display. The automatic reply message is selectable from call sign, voice message and position information.
• The GPS log function logs your position information at regular intervals (1 second–60 seconds, depending on the setting) and memorizes this in the microSD card to export to your PC. The GPS logger only mode turns on the GPS logger function with the radio in sleep mode.
• Double the bands mean double the display to display to read them. The large full dot-matrix display with easy-to-read characters increases the amount of information available to you.
• FM and AM broadcast stations can be listened to, while using the dualwatch function for monitoring ham bands. When a ham band signal is received, the broadcast station is automatically muted. An earphone cord can be used for an FM broadcast antenna.
• The ID-51E has superior IPX7 waterproof protection (1m depth of water for 30 minutes). It can be used in harsh outdoor environments, when hiking, mountain biking, touring and mountain sports.
• The QSO recorder function records incoming and outgoing calls. The voice recorder function can record an off-line conversation.
• When used with a microSD card (Up to 32GB), the microSD card can store various contents including voice memory, DV auto reply message, TX voice message, QSO log, RX history log and GPS log data. Memory channels, D-STAR repeater memories and other personal settings can be saved to the microSD card and can be loaded to the ID-51E transceiver.
• The ID-51E has a total 1304 memory channels (including 500 regular channels, 700 D-STAR repeater (DR) memories, 100 scan edges and 4 call channels) with 26 memory banks. All memory channels, program scan edges and memory banks can be named with 8-character channel comments.
• Using a highly-efficient PA amplifier, the ID-51E generates 5W of RF output power from this compact body. The supplied BP-271 provides up to 4.5 hours* of operating time, and the optional large capacity battery pack, BP-272 provides up to 7.5 hours* of operating time. When you don't need full power operation, you can reduce output power to 2.5/1.0/0.5/0.1W for saving battery consumption. * Typical operation with 1:1:8 duty cycle in DV mode. (Power save ON.)
• The ID-51E supports various scan types for maximum reception and ease of use. (Full scan, Programmed scan, Duplex scan, Memory scan, Mode memory scan, All bank scan, Selected bank scan, Tone scan, Bank link scan (DMS), Program scan link, Skip scan, Temporary skip)
• The CS-51 cloning software* is supplied with the ID-51E (supplied with the application CD). Used with this software, various settings including the memory channels, D-STAR repeater memories and other settings can be made from a PC. The latest version of the CS-51 will be available from the Icom Inc. web site. * Either optional OPC-2218LU USB cloning cable or a microSD card is required for transferring the data.
• An external DC power jack allows rapid charging to the connected battery pack. When used with an external DC power supply, the BP-271 can be charged in 3 hours (approx.).
• One touch reply function
• Digital squelch functions: digital code squelch and digital call sign squelch
• Analogue FM mode with CTCSS/DTCS code squelch
• 16 DTMF memory channels (24 digits)
• Auto power save
• Auto power off
• Clock function
• Priority watch
• Key lock function
• CI-V level converter for remote radio control
• Squelch release function to monitor a weak signal.
• SPEECH function announces received call sign and operating frequency and mode
• LCD and keypad backlighting
• RS-MS1A, Free Download Android™ Application. The RS-MS1A allows you to connect your Android™ device to the ID-51E*. You can see the location of repeater sites on a map application and set them to the ID-51E. Text messages and pictures can be sent and received with your Android™ device.
• DV Fast Data Mode*. By using data in place of voice frames, the ID-51E transfers data 3.5 times faster (3480 bps) than in the conventional DV mode (with voice). Pictures taken by an Android™ device can be quickly transmitted in the DV Fast Data mode. (* The DV Fast Data mode is not compatible with the DV mode low-speed data communication.)
• DV and FM Repeater Search Function. The repeater search function searches for nearby analogue FM repeaters as well as DV repeaters using the repeater memories and the integrated GPS*. (* To use the repeater search function, the position data of the repeater is required.)
• Additional Dplus Refl ector Link Commands. Dplus reflector link commands are added to the DR function to allow easy multiple repeater connection through the reflector.
• GPS position data can be sent simultaneously with the serial data communication
• Enhanced D-PRS functions: receiving only Base/Object/Item/Weather formats
• Altitude data added to the GPS memories
• CI-V commands can be sent through DATA connector
• CI-V commands added such as GPS TX mode, DV data TX and GPS ON/OFF settings
• Callsign, repeater list and GPS memory import and export in the CSV format