Two-Way Radio Battery Charger, Adapter, Power Supply
- further categories
Two-way transceivers are now part of our everyday lives, whether we use them for personal or professional purposes. To use them conveniently, we need a battery charger, adapter or power supply. Read more...
• Rapid multi-charger for BP-298/BP-299 battery packs
• Up to six battery packs can be simultaneously charged
• Power Supply Voltage: 12.0 ー 16.0 V DC
• Overcharge Protect Timer: 11.5 Hours (at rapid charging)
• Standard accessory: BC-157S AC adapter
• PS000150A32 Micro USB Wall Charger For Wave TLK 110i Radio
• Dual desktop charger for simultaneous charging of radio and battery
• Maximum charging current: 2000 mA (total)
• Input: 5 V DC, 2 A
• Operating temperature: 0°C to 45°C
• Certification: CE
• Euro-standard USB Power Adapter 5V/2A
• Euro/UK-standard USB Power Adapter 5V/2A
• USB power adapter with replaceable mains connector (Euro/UK)
• Standard USB cable (USB to USB Type-C)
• For charging only
• Length: 1m
• Compatible devices: PNC360, PNC360S, PNC370SE, PNC550, PDM680 (and for AP515, AP565, BP515, BP565
• Wall charger replacement
• Can be connected to a charging base
• Operating Voltage (Input): 11 V to 25 V DC
• 6-place charger
• The required 1 power supply and 6 POA59 charger inserts are part of the package
• Max charging current: 1000 mA (per case)
• Input: 12 V DC / 7 A
• Compatible radio devices: AP585, BP515, BP565, PD405, PD415, PD485, PD505, PD565, PD605, PD665, PD685, PD705, PD755, PD785, PD715 Ex, PD795 Ex, PT560, PT580H Plus, PD985.
• General MCU rapid-rate desktop charger for Li-Ion, Li-polymer, Ni-MH batteries
• For AP585, BP515, BP565, PD4, PD5, PD6, PD7, PD715Ex, PD795Ex, PD795IS, PD985, PT560H, PT580H Plus, PT790Ex radios
• Charger with 12 slots ( 6 batteries, 6 radio with battery)
• 6 batteries and 6 radios can be charged simultaneously
• The required 1 power supply and 12 charging inserts are included in the package
• Max charging current: 1400 mA ( per case)
• Input: 12 V DC / 7 A
• Compatible radios: PNC380, PNC380D
• Dimensions (mm): 488 x 107.4 x 44.5
• Dual charger for charging a radio and a battery at the same time
• Maximum charging current: 2000 mA (total)
• Input: 5 V DC, 2 A
• Compatible radio: PNC380
• Power supply with fan control circuit (220 W)
• With two DC outputs: one for the device (e.g. signal repeater) and one for an external lead-acid battery (e.g. 12 V/40 Ah)
• Automatic switchover to battery in case of power failure (lead-acid battery not included)
• Optional 19 inch rack mounting kit
• Noise level lower than 45 dBA
• Input voltage: 100-240 VAC
• Output voltage: 13.8 V DC ±1.0%
• Output current: 0 - 16 A
• Continuous current (second output): 1000 mA
• Operating temperature: -20 °C to 65 °C
• Power cable: 1.8m
• Dimensions: 296 x 176 x 87.5 (mm)
•External voltage converter from 24 VDC to 12 VDC / 8.4 A (RoHS)
• Input voltage: 16.8-31.2V DC
• Output voltage: 12V DC 8.4A
• Operating temperature: -40 °C to 55 °C
• Dimensions: 161 x 68 x 36 (mm)
• Certification: CE
• Charger with 6 slots
• 6 batteries or 6 radios can be charged
• The required 1 power supply and 6 charging inserts are included in the package
• Max charging current: 2000 mA ( per case)
• Input: 12 V DC / 15 A
• Compatible radios: HP505, HP565, HP605, HP685, HP705, HP785, PD405, PD415, PD485, PD505, PD565, PD605, PD665, PD685, PD705, PD755, PD785, PD715 Ex, PD795 Ex, PT560, PT580H Plus, PD985
• Dimensions (mm): 564,9 x 118,1 x 64,4
• General desktop charger for Li-Ion, Li-polymer, Ni-MH batteries
• For HP505, HP565, HP605, HP685, HP705, HP785 radios
• Power Adapter for Rapid Charger
•Operating voltage: 90-264V AC
• Output: 12V DC / 1A
• Applicable desktop chargers: CH10A03, CH10A07, CH10L07, CH10L16, CH10L19, CH10L23, CH10L27, CH10L28, CH10L29
• Desktop cabinet with integrated power supply for MD785, MD785i
• The desktop base station cabinet supplies power to the mobile radio from the mains or from the spare battery
• Maximum output power 300 W in mains mode or battery backup mode
• If an external lead-acid battery (12 V/40 Ah) is connected, it automatically switches to this battery in case of power failure
• Charges the lead-acid battery with a maximum charging current of 1000 mA
• Output voltage: 13.6 V DC ±1.0%
• Mains operating voltage: 90-264 V AC
• Battery charging current: up to 1000 mA
• Operating temperature: -40 °C to 70 °C
• Dimensions: 271.2 x 220 x 150 (mm)
• EU Power Adapter for dual unit charger
• Power supply adapter without mains cable for multi-unit chargers
• Operating voltage: 90-264 V AC
• Output: 12 V DC, 7 A
• Output connector type: low voltage power connector 2.5 x 5.5 mm
• Suitable for multi-unit chargers: MCA02, MCA03, MCA06, MCA08, MCA10, MCL19, MCA22, MCL23, MCL30, MCL33, MCL34, MCL35, MCL35-S, MCL36, MCN05
• Dual Pocket MCU charger, (includes PS2004, EU standard power supply)
• Dual charger with two units designed for charging lithium-ion and NI-MH batteries
• Compatible radios: PD4, PD5, PD6, PD7, PD715Ex, PD795Ex, PD795IS, PD985, PT560H, PT580H Plus, PT790Ex, PT560H, PT780H Plus, PD715Ex, PD715Ex, PD795IS, PD985, PD985, PT560H, PT580H Plus, PT790Ex
• Battery adapter for battery optimising system MCA02 and MCA05 to charge the following radio models: PD405, PD415, PD485, PD505, PD565, PD605, PD665, PD685, PD705, PD755, PD785, PD715Ex, PD795Ex, PD985, PT560H, PT580H Plus
• Charging unit provided for installation in MCA08 and MCA10 chargers to charge the following radio models: PD405, PD415,P PD485, PD505, PD565, PD605, PD665, PD685, PD705, PD705G, PD755, PD755G, PD785, PD785G, PD715Ex, PD795Ex, PD985, PT560H, PT580H Plus, AP585, BP515, BP565
• AC/DC Power Adapter (100~240VAC/2A 16.8V/8A)
• Power adapter for repeater HR655
• Required to charge the optional battery (BL9915)
• EU-standard switching power adapter for intelligent charger CH20L04 and CH20L06
• Input: 100-240 V AC
• Output: 12 V DC / 2 A
• Power supply adapter without mains cable for multi-unit chargers
• Rated power: 600W
• Dimensions: 228.5 mm X 105.0 mm X 44.0 mm
• Weight: approx. 1 kg
• Input voltage range: 90-264 V AC
• Output: 28 V DC
• Compatible devices: RD985, RD985S
With today's modern battery chargers, you just plug them in and, once charged, simply lift out the transceiver and you're ready to go. A battery charger in the office, warehouse or shop also makes it easy to store and charge your device. Plus, this charging method can extend the life of your CB radio.
Do transceiver battery chargers and adapters have protection against short circuit, overcharging or overheating?
In the DND Telecom webshop you will find battery chargers, adapters and power supplies from the brands Icom, Motorola, Entel, Alan, Albrecht, Midland, Hytera, among others, and adapters, chargers have protection against short circuit, overcharge or overheating.
How many outputs does the transceiver adapter have and what devices can it be used for?
The wall adapter has one output that you can plug into the microphone socket of the transceiver, but there is also a 6-inch fast charger that can accommodate 6 Li-Ion transceiver batteries, or you can choose a multi 6-inch fast charger.
What connectors are on the transceiver adapter, battery charger and what devices are they compatible with?
There are many types of audio products available today. For these devices, there has been a major change in recent years so that we don't have to buy different battery chargers and adapters for each type and brand. Legislators have therefore introduced legislation to standardise the rules for connectors and jack plugs.
But taxpayers are not affected by this change. That's why many two-way CB radio manufacturers are still using their own proprietary connector kits. Many brands use their own standard across their entire product line, while others, such as Icom and Motorola, use multiple types of connectors that are specific to their models and their variants. So in each case, look at what you have and choose the right adapter, charger or power cable for you.
What is the output voltage and charging current of the transceiver battery chargers, adapters and chargers?
For wall chargers and battery chargers, the input voltage that the devices receive from the mains is 230V, this is usually converted to 12V, the charging current of these devices is usually 3A.
What lights or features help us to monitor the charging status of the transceiver?
There is no more unpleasant situation than when your transceiver battery runs out during work or outdoor adventures. If you've got a cigarette lighter charger, you can quickly remedy this problem. But sometimes we have to go back to the office or home and use a fast charger to give our walkie-talkie a new lease of life. On the front or side of today's modern devices, a small red diode indicates that the charger is working, meaning that the battery in the transceiver or the device itself is still charging. But it's worth thinking about how to avoid this situation, which can even extend the battery life of your device.
For example, reduce communication time by making messages more precise, clear and short. If you find that your battery is running low, switch off rarely used functions. But you could also save energy by reducing the display light. There's one more thing to look out for when charging your transceiver. Many of us put the device on the charger in the evening and in the morning we are satisfied to find it fully charged. This leads to the battery dying before its time. Therefore, when the battery charge of the transceiver reaches 100%, remove it from the charger or unplug the adapter.
Can multiple devices be charged simultaneously with the transceiver adapter?
Yes, there is a battery charger that can hold up to 6 transceiver batteries at the same time, allowing employees of larger companies to charge their devices at the same time.
We have a number of options to charge our devices efficiently. You can choose from wall chargers, cigarette lighter chargers, 6-bay fast chargers, complete fast chargers, adapter chargers, multi-meter power cords, etc. We offer battery chargers, adapters and power supplies from ICOM, Motorola, Albrecht and many other brands.