Product Categories
Electrosmog Shielding Mesh and Fleece

YShield ARM40 Shielding Reinforcement Fabric (100 cm x 1 meter)

YSH-062-999
YShield ARM40 Shielding Reinforcement Fabric (100 cm x 1 meter)
YShield ARM40 Shielding Reinforcement Fabric (100 cm x 1 meter)

Key features of YShield ARM40 Shielding Reinforcement Fabric (100 cm x 1 meter)

• Reinforcement fabric as universal standard product
• Length: By the meter / 50 m roll
•Attenuation: 23 dB
• Weight: 180 g/m²
• Material thickness: 0,45 mm
• Color: Schwarz
• Mesh width: 3,5 x 4,0 mm
• Tensile strenght max.: 1750 N/5 cm (warp and woof)
• Elongation max.: 3,9 % (warp and woof)
• Materials: Glas filber, stainless steel fibers, latex coating
• Weight: 200 g

The product is ordered directly from the manufacturer's headquarters in Germany. The lead time is approximately 2-3 weeks if the product is in stock, otherwise it is subject to confirmation by the manufacturer.
Gross price (including 27% VAT): 10.14€ (Net price: 7.98€)
Add to Cart Price Watch
You can ask for e-mail price notifications when the price of this product gets under a limit you specify. To use this feature you need to have a user account and to be signed in.
1 year(s) warranty
yshield_arm40_data_sheet.pdf
English prospectus

yshield_arm40_laboratory_screening_report.pdf
English user guide

1 year(s) warranty

Further details of YShield ARM40 Shielding Reinforcement Fabric (100 cm x 1 meter)

Properties

ARM40 is a non-slip, dimension stable glass fibre mesh for an extensive shielding of high frequency (HF) and low frequency electrical (LF) fields.

  • One product for reinforcement in a thermal insulation system as well as shielding
  • Patented glass fibre mesh with stainless steel threads woven into it
  • The glass fibres are reliably protected against alkaline attacks in the plaster system by a high-quality finish
  • Electrically conductive surface for easy grounding
  • Audited and certified according to ETAG 400

Application

Can be used as reinforcement fabric on the exterior in a thermal insulation system under plaster or on the interior under plaster. Furthermore, for loose laying in the roof area, underneath attached facades, underneath floor coverings, etc.

Processing

The processing of the shielding mesh is identical with the application of conventional glass fibre fabric. Needs to be pressed non-porously and wrinkle-free into the freshly spread reinforcing mass, then levelled out.. The mesh needs to lie in the upper third of the reinforcing mass and be completely covered by it. The overlapping between the panels needs to be 10cm. The overlapping needs to be ensured at corners of a building, too. Building openings (windows, doors) require a diagonal reinforcement with fabric strips. Has the mesh been cut in (e.g. in the area of scaffolding anchors), an additional fabric strip needs to be placed above the cut. For grounding, the stainless steel tape GSS25 must be screwed securely onto the underground across/with all panels.

Grounding

This product with an electrically conductive surface has to be integrated into the functional-equipotential bonding (FEB).

Shielding attenuation HF & LF

This product shields high frequency electromagnetic fields (HF). Unless otherwise stated, the indicated dB-values apply to 1 GHz. Measurement from 600 MHz to 40 GHz according to standards ASTM D4935-10 or IEEE Std 299-2006.

This product with an electrically conductive surface shields low-frequency alternating electric fields (LF).