Icom
Icom is one of today's best-known brands of wireless communication devices. Since its inception in 1964, the company has evolved considerably to offer the innovative range of products it does today. The brand is a trusted manufacturer of communication devices such as walkie-talkies, industrial two-way radios, amateur radios, wifi transceivers, communication receivers and radios for navigation and aviation. Read more...
• Battery case 6 × AA (LR6)
• IP54 dust and water protection
• 2010 mAh Li-ion battery
• Battery case for 5 x AA cells
• IP54 protection
• 3.6 V / 2350 mAh Li-ion battery
• BC-235 charger is needed for charging
• Battery case for 3 X AAA cells
• 7.2 V / 2250 mAh Li-ion battery for Icom Ic-F4002 V72 radio
• BC-240 is needed for charging
• 7.2 V / 2350 mAh Li-ion battery
• For Icom IC-SAT100 radio
• 7.2 V / 3350 mAh Li-ion battery IP730D Hybrid IP/Digital two way radio series
• Waterproof: IP68 (Equivalent to the main radio)
• Rechargeable 7.2 V Li-ion Battery Pack (2280 mAh/2400 mAh (min/ typical).
• Provides 10 hours* of operating time (* Approximate, Typical operation with 5:5:90 Power save ON)
• 7.2 V / 3150 mAh Li-ion battery (charge with OPC-2421 DC power cable or BC-202IP3L charger)
• For Icom IC-705 amateur radio
• Communication throughout the Coverage Area of LTE (4G) and 3G Network with the user's SIM card
• The service is available within the EU (depending on the SIM card used by the customer)
• Capable of full-duplex communication (transmitter and receiver at the same time, like a GSM phone)
• Push-to-Talk Instant Communications (no call-setup time)
• Plannable costs due to a fixed monthly fee (depending on the SIM card used by the customer)
• No radio license required
• The IP-503H Lite does not include a SIM card. Can be operated with its own SIM card
• The IP-503H Lite is not operationally compatible with the IP-503H. The latter uses Icom's own SIM card on Icom's own server
• This article number is the monthly license fee for the existing IP503h Lite for the use of the Icom controler server
• Frequency coverage: 380-470Mhz
• High-resolution colour LCD display
• 32 programmable channels, 2 channel zones
• Integrated IDAS NXDN digital system
• Built-in Bluetooth and GPS receiver
• Lone worker and man down function with built-in motion sensor
• Built-in SEL 2/5, CTCSS, DTCS coder and encoder, DTMF autodial
• Digital voice recording
• Multiple controller configurations
• Equivalent to MIL-STD 810 C, D, E, F and G requirements
• Frequency coverage: 136-174MHz
• High-resolution colour LCD display
• 1024 programmable channels, 128 channel zones
• Integrated IDAS NXDN digital system
• Built-in Bluetooth and GPS receiver
• Lone worker and man down function with built-in motion sensor
• Built-in SEL 2/5, CTCSS, DTCS coder and encoder, DTMF autodial
• Digital voice recording
• Multiple controller configurations
• Equivalent to MIL-STD 810 C, D, E, F and G requirements
• 16 analogue channels (446,00625MHz-446,19375 MHz)
• Professional rugged body and high performance
• Easy to use
• 1500 mW audio output power
• 38 CTCSS group codes (built-in CTCSS and DTCS encoder and decoder)
• 240g weight with battery
• Smart-ring and inversion type voice scrambler
• 21 hours operation
• Confirms with IP67 standard (dust-tight and waterproof)
• Equivalent to MIL-STD 810 G requirements
• 19-inch rack-mountable, 2 unit high design with display
• Space for additional RF channel module
• Programmable between 136-174 MHz
• IDAS digital and analogue mixed mode
• 32 programmable channels, 5 programmable buttons
• Maximum 25W RF output power
• Upgradeable with optional control cards (Simulcast Conventional, Multi-site Conventional, Single site Trunking, Multi-site Trunking)
• Remote access via IP interface via optional UC-FR5300 IP card
• Can also be operated as a stand-alone repeater
• Programmable between 136-174 MHz
• IDAS digital and analogue mixed mode
• 32 programmable channels, 5 programmable buttons
• Maximum 25W RF output power
• Upgradeable with optional control cards (Simulcast Conventional, Multi-site Conventional, Single site Trunking, Multi-site Trunking)
• Remote access via IP interface via optional UC-FR5300 IP card
• Programming software for IC-7100 amateur radio
• Programming / cloning software for IC-A120 radio
• Programming software for IC-A16E airband radio
• Programming software for IC-A25CE/NE airband radios
• Programming / cloning software for IC-F1000 / IC-F1000S / IC-F1000T / IC-F2000 / IC-F2000S / IC-21000T radio
• Programming / cloning software for IC-F1100D/ IC-F2100D radio
• Programming / cloning software for IC-F29DR radio
• Programming / cloning software for IC-F29SDR radio
Icom wireless communication devices are all made in Japan
Icom Inc. is one of the companies for which quality has been more important than cost reduction. The company did not move production to countries that would produce its amateur, commercial, marine and aviation radios at lower cost. The brand felt it was essential that its products continued to be labelled "Made in Japan". It therefore kept 100 percent of its manufacturing base in Japan. But production was not only kept in the mainland, it was also significantly improved.
Icom's Arida plant has had an advanced manufacturing system for many years. For example, since 2019, industrial robots have been assembling the communication devices manufactured by the brand. But the company is also involved in a number of collaborations. As early as 2007, it signed a partnership agreement with KDDI, and a few years later the company's management decided to work closely with Ageet and NTT West Japan. But Icom acquired Macrotechnos Co Ltd last year to put even more emphasis on software development within the company.
Icom is a global brand
Icom is known around the world today as a trusted brand dedicated to two-way radio communications. The company's transceivers are used by many professional organisations around the world, including the US Department of Defense. The brand has one of the widest ranges of models in the professional commercial radio market. Icom currently offers both dPMR and NXDN based transceivers, including the so-called dPMR446 transceivers for unlicensed use, as well as professional two-way radio devices for the URH band. Of course, we also offer ATEX versions and analogue and digital licence-free radios.
Icom's worldwide sales and service network
Icom Inc. sells its amateur radios and other wireless communication devices in more than 80 countries around the world. The company focuses not only on sales, but also on service. To this end, the company has a well-established service network. In Hungary, DND Telecom Kft. has been the Hungarian importer of Icom Inc. for more than 20 years. Thanks to this close cooperation, the entire Icom portfolio is available in the DND Telecom webshop, including walkie-talkies, industrial VHF radios, amateur radios, wifi transceivers, radios for aviation and shipping, etc.
At our service centre, we also carry out warranty and out-of-warranty repairs on branded communication devices, all using genuine factory Icom parts of course. If necessary, we return the devices to Icom, where we will carry out the necessary tests and repairs. In addition, we are happy to program and install Icom products.