Icom
Icom is one of today's best-known brands of wireless communication devices. Since its inception in 1964, the company has evolved considerably to offer the innovative range of products it does today. The brand is a trusted manufacturer of communication devices such as walkie-talkies, industrial two-way radios, amateur radios, wifi transceivers, communication receivers and radios for navigation and aviation. Read more...
• Connector information: 14 pin spring type
• IP67 dust and water resistant handheld microphone
• Waterproof microphone (IP68) can be used while in rain
• Equipped with an emergency switch at the top
• Increased speaker-microphone volume depends on the combination of the transceiver and microphone
• Cable Length: 300 mm
• Connector Information: 14 pin spring type; Φ3.5 mm earphone jack
• Tie clip microphone with sub PTT button
• Equipped with 2.5 earphone jack
• Cable Length: 1000 mm
• IP54 (Except for earphone jack)
• DTMF microphone with sub PTT button
• 3,5mm jack socket for headphones
• Equipped with an emergency switch at the top
• Cable Length: 460 mm
• IP67 (Rating of waterproofing is equivalent to the rating of the radio it is connected to)
• Carrying case for IP730D/IP740D
• Charging is possible while the carrying case is attached
• Frequency range: 1616 MHz to 1626.5 MHz
• Install the antenna unit (with RF unit) to the rooftop, and use the radio from a vehicle, indoors, or even from the basement
• Easy wiring works between the antenna unit (with RF unit) and main unit using a LAN cable (Cat 5e), (User supplied LAN cable is required to replace the supplied 20m LAN cable)
• Compatible with both 13.2 V DC and 26.4 V DC vehicle power source
• Dust- and water protection: antenna unit with RF unit IP67, main unit IP54, microphone IP55
• 1500 mW powerful audio output
• Voice Recording function
• Built-in Bluetooth capability
• Multiple language display ( English, Chinese, French, Japanese, and Spanish)
• Integrated GPS receiver shows received signal position
• Short Data Message
• AES 256-bit encryption for security
• Tested to the MIL-STD-810 environmental tests
• Frequency range: 1616.02–1626.48 MHz (Uplink/Downlink), 1575.42–1605.40 MHz (Downlink, GNSS L1 Band)
• In-Building Repeater for Iridium Satellite Communications
• Relays Iridium and GNSS signals, and provides a solution for satellite communications indoors and mobile applications
• Indoor coverage: Maximum 5 m
• RF gain level can be adjusted on the front panel (40 to 50 dB)
• Compact design offers flexible installation: 265 × 55 × 170 (W × H × D, mm)
• Not only satellite PTT (IC-SAT100), but also Iridium satellite phones and SBD (Short Burst Data) service can be used
• Attention: NO T/A, No CE marking available. Designed for non-EU region and/or Governmental user who does not require any kind of Type Approvals
• Rapid multi-charger for BP-300 battery packs
• Up to six battery packs can be simultaneously charged
• Power Supply Voltage: 12.0 ー 16.0 V DC
• Overcharge Protect Timer: 11.5 Hours (at rapid charging)
• Standard accessory: BC-157S AC adapter
• Coaxial cable for AH-40
• Cable Length: 5 m
• Extension cable for use with speaker-microphone (SAT100M)
• Cable Length: 2 m
• Charger insert for BC-214N charger and IC-SAT100 satellite radio
• UHF cuttable antenna (380-520 MHz)
• The picture shows a similar product
• With SMA connector
• Frequency coverage: 136-174MHz
• High-resolution colour LCD display
• 1024 programmable channels, 128 channel zones
• Integrated IDAS NXDN digital system
• Built-in Bluetooth and GPS receiver
• Lone worker and man down function with built-in motion sensor
• Built-in SEL 2/5, CTCSS, DTCS coder and encoder, DTMF autodial
• Digital voice recording
• Multiple controller configurations
• Equivalent to MIL-STD 810 C, D, E, F and G requirements
• Frequency coverage: 380-470Mhz
• High-resolution colour LCD display
• 1024 programmable channels, 128 channel zones
• Integrated IDAS NXDN digital system
• Built-in Bluetooth and GPS receiver
• Lone worker and man down function with built-in motion sensor
• Built-in SEL 2/5, CTCSS, DTCS coder and encoder, DTMF autodial
• Digital voice recording
• Multiple controller configurations
• Equivalent to MIL-STD 810 C, D, E, F and G requirements
• Frequency coverage: 136-174MHz
• 512 programmable channels, 128 zones
• Output power: 5/4/1W
• LCD with backlight
• Programmable menu items and other functions
• Lone worker and man down function with built-in motion sensor
• Built-in Bluetooth function
• MIL-STD 810 G & IP67
• 1300 mW loud and intelligible internal speaker audio
• Voice recording/playback
• Digital voice scrambler (Low level encryption)
• Not supplied accessories: charger and antenna!
• Frequency coverage: 350–400, 400–470, 450–512, 450–520MHz
• 512 programmable channels, 128 zones
• Output power: 5/4/1W
• LCD with backlight
• Programmable menu items and other functions
• Lone worker and man down function with built-in motion sensor
• Built-in Bluetooth function
• MIL-STD 810 G & IP67
• 1300 mW loud and intelligible internal speaker audio
• Voice recording/playback
• Digital voice scrambler (Low level encryption)
• Leather carrying case for IC-F29SR2, IC-F1000/2000 radio
• Leather carrying case for IC-F1000S/T és IC-F2000S/T Radios
• Mount onto the UC-FR5000 or UC-FR5300
• For IDAS multi-site conventional
• Enable the Multi-Site conventional mode use
• Upgrade Card of MultiSite Trunking for UC-FR5000#01/UC-FR5000 #02
• For IDAS Multi-Site trunking
• Enable the Multi-Site Conventional/Trunking mode use
• Audio codec conversion for digital transceiver
• AMBE+2 is used for digital encode/decode
• Connector information: USB-MiniB×1
• Cable Length: 15 cm
• Rapid multi-charger for BP-283, BP-284, BP-290, BP294 battery packs
• Up to six battery packs can be simultaneously charged
• Power Supply Voltage: 12.0 ー 16.0 V DC
• Overcharge Protect Timer: 10.5 Hours (at rapid charging)
• Standard accessory: BC-157S AC adapter
• Charge Current: 880 mA
• Operating temperature range: +16℃～+40℃
• 36 NM Range Observation with 4 kW Output Radome Scanner
• Simplified ARPA (Automatic Radar Plotting Aids) Function - External bearing, speed and position data required
• DSC (Digital Selective Calling) Information Function - External bearing, position and DSC data required
• AIS (Automatic Identification System) Overlay Function - External bearing, position and AIS data required
• Display type:10.4-inch Color TFT LCD
• TLL (Target Latitude Longitude) Function - External bearing and position data required
• True Trail Function - External bearing and position data required
• Scanner Unit: IPX6 (Powerful jet water protection)
• Scanner Unit Frequency: 9410 MHz ±30 MHz
• Scanner Unit Supplied system cable: 15 m
• Preheat time: 90 seconds
• Power supply: 10.2–42 V DC
• Antenna connection cable for radar
• Cable Length: 30 m
• Connector information: 7 pin
• Optional video (analog RGB) output unit for external monitor
• 640x480 analog RGB output
• Used for MR-1010RII Marine Radar
Icom wireless communication devices are all made in Japan
Icom Inc. is one of the companies for which quality has been more important than cost reduction. The company did not move production to countries that would produce its amateur, commercial, marine and aviation radios at lower cost. The brand felt it was essential that its products continued to be labelled "Made in Japan". It therefore kept 100 percent of its manufacturing base in Japan. But production was not only kept in the mainland, it was also significantly improved.
Icom's Arida plant has had an advanced manufacturing system for many years. For example, since 2019, industrial robots have been assembling the communication devices manufactured by the brand. But the company is also involved in a number of collaborations. As early as 2007, it signed a partnership agreement with KDDI, and a few years later the company's management decided to work closely with Ageet and NTT West Japan. But Icom acquired Macrotechnos Co Ltd last year to put even more emphasis on software development within the company.
Icom is a global brand
Icom is known around the world today as a trusted brand dedicated to two-way radio communications. The company's transceivers are used by many professional organisations around the world, including the US Department of Defense. The brand has one of the widest ranges of models in the professional commercial radio market. Icom currently offers both dPMR and NXDN based transceivers, including the so-called dPMR446 transceivers for unlicensed use, as well as professional two-way radio devices for the URH band. Of course, we also offer ATEX versions and analogue and digital licence-free radios.
Icom's worldwide sales and service network
Icom Inc. sells its amateur radios and other wireless communication devices in more than 80 countries around the world. The company focuses not only on sales, but also on service. To this end, the company has a well-established service network. In Hungary, DND Telecom Kft. has been the Hungarian importer of Icom Inc. for more than 20 years. Thanks to this close cooperation, the entire Icom portfolio is available in the DND Telecom webshop, including walkie-talkies, industrial VHF radios, amateur radios, wifi transceivers, radios for aviation and shipping, etc.
At our service centre, we also carry out warranty and out-of-warranty repairs on branded communication devices, all using genuine factory Icom parts of course. If necessary, we return the devices to Icom, where we will carry out the necessary tests and repairs. In addition, we are happy to program and install Icom products.