Icom IC-F61 ATEX UHF Two-Way Handheld Radio (discontinued)

Further details of Icom IC-F61 ATEX UHF Two-Way Handheld Radio

• Certified to the ATEX Protection II2G Ex ib IIA T3 Gb
• Up to 10 hours of operating time with the supplied 1850mAh lithium-ion battery pack. (Tx: 5%; Rx:5%; Stand by:90%)
• The radio has outstanding protection against dust and water that is equivalent to IP67. The radio can withstand submersion in 1m depth of water for up to 30 minutes and has dust-tight construction that prevents the ingress of dust. The battery connectors made with anti-corrosion metal surface which is surrounded with a rubberized layer.
• Maximum 128 channels can be programmed into the radio in 8 channel groups.
• The radio has 7 progammable buttons including the red emergency button on the top of the radio. The individual volume control and channel selector provide easy and convenient operation.
• Use the built-in CTCSS, DTCS, 2-Tone, 5-Tone, DTMF autodial and BIIS signaling capabilities to set up your talk group or selective calling. The radio can decode ten 2-Tone codes or eight 5-Tone codes on a channel. When a matched tone is received, the following actions are programmable for each code. Bell icon, Answer back call, Beep sound, Auto transmit, Radio Stun/Kill/Revive, Voice recorder, Vibration alert
• The 5-Tone signalling (encoder/decoder) gives you selective calling, quiet stand-by and other convenient functions with programming. The radio “stun” function disables a radio over the air and the “revive” function restores the stunned radio.
• Channel spacing: 12.5/20/25Khz; PLL channel step: 2.5, 3.125Khz (VHF); 5, 6.25Khz (UHF)
• Built-in noise reduction for crystal clear communication
• The IC-F51 ATEX / IC-F61 ATEX has a built-in rolling type voice scrambler equivalent to the UT-110.
• 2-step power save
• Normal and priority scan
• Power ON password
• The optional speaker microphone, HM-138, also has waterproof construction equivalent to IPX7. The HM-138 is approved for use with ATEX models.
• Equivalent to MIL-STD 810 C, D, E requirements