Reflective Tape

Where to use reflective tape? How to choose the right tape width and length?

These types of tapes can be used on devices around our homes, such as bicycles, strollers, and even trailers. We use them to make these devices more visible. But we also use them in construction, agriculture, transport and industry. For example on machinery and equipment. But they can also be used to mark other obstacles so that they can be seen immediately in low light conditions. In road traffic, they warn of hazards and obstacles.

But they can also be used to mark other dangerous objects so that they can be seen immediately in poor lighting conditions. For example, a special application is marking the surfaces of barrier gates. They can even be stuck on clothes. Wear functional clothing with reflective tape, because visibility is one of the pillars of safety.

What is the ideal width and length of reflective tape?

Reflective tape from the DND Telecom webshop can be cut to the size you need, with rolls measuring 2 metres in length, 25 mm in width and 0.19 mm thick. These sizes are perfect for achieving your goals by applying reflective tape.

How durable are reflective tapes and under what conditions can they be used?

They are very durable, thanks to which they can be effectively cleaned of dirt. They are easy to apply, adhere strongly even at low temperatures and are UV resistant. This means they can be used in environments where they are exposed to strong sunlight.

How can reflective tapes be effectively attached to different surfaces?

To ensure that the reflective tapes remain in the place where they are applied for a long time, they should be thoroughly cleaned. Do not get them greasy, wet or dusty, as they will soon run off.

How environmentally friendly is it to use reflective tape?

For DND Telecom webshop, the environment is very important, which is why we only offer reflective tapes with an adhesive surface made of rubber and a bottom and top layer made of recyclable materials.

How can we clean and maintain reflective tape to ensure a long life?

For optimum adhesion results, we recommend using reflective tapes only on smooth, flat surfaces. As mentioned above, the surface should be cleaned before application to ensure it is free of grease, dry and dust. Then, in order for the adhesive to take full effect, you need to run your finger along the reflective tape and press several times while applying it.

Be careful not to use abrasive cleaning products when cleaning the reflective tape. The best solution is to use soapy water, which can be applied to the outer surface of the tape with a damp cloth. Then rinse with a little clean water.

Reflective tapes available from the DND Telecom webstore are weather-resistant, solvent-resistant, resistant to weak acids, alkalis, brine and the occasional fuel spill. They are also ideal for indoor and outdoor use.